Thanks giving

Please scroll all the way to the bottom where you can find "PERSON FINDER" which is made to help people trapped in the NEPAL TRAGEDY. Kindly share it and you might help one or the other.
Thank you for visiting this blog. Hope you like it. If you do, please share and spread the info.

GSMArena.com - Latest articles

Friday, August 8, 2014

Official firmware leaks for Samsung GALAXY Note 3

Samsung GALAXY Note 3 SM-N900


Official Android 5.0 Lollipop firmware (first released in RUSSIA):

Installation manual:

Step-1: Extract the downloaded firmware zip using any extracting tool to get a .tar.md5 file with a few other files, which are optional
Step-2: Extract the Odin zip to get Odin3 v.3.09.exe with a few other files
Step-3: Power off the Galaxy Note 3
Step-4: Put the phone into Download Mode by pressing and holding HomePower and Volume Down button together
Note: Ensure that you have installed proper USB drivers installed on your PC.
Step-5: Run Odin as Administrator on the computer. For this, click on the tool then right-click and select Run as Administrator from the drop down menu
Step-6: Connect Galaxy Note 3 to the PC using USB cable while it is in Download mode. Wait for some time until Odin detects the device. When the phone is connected successfully, the ID: COM box in Odin will turn light blue with the COM port number. This step might take some time
Step-7: In Odin, click AP button and select the firmware file with .tar.md5 extension
Step-8: Enable Auto Reboot and F.Reset Time checkboxes in Odin. Ensure Re-Partition checkbox is not checked
Step-9: Double check everything and click the Start button in Odin. The installation process should begin now and take a few minutes to complete
Step-10: When the process is completed, the phone will restart automatically. Once the home screen appears on the phone, disconnect the phone from the computer
Required files: N900XXUEBOA6 
SOURCE: Sammobile
---------------------------------------------------------------------------------
Official lollipop leaked firmware:

Procedure to install:
  • Download and extract the firmware files to the desired location (preferably the desktop) on the computer.
  • Download and extract the Odin zip file to the same location where the firmware files are extracted.
  • Double-click on Odin3v3.09.exe to begin flashing the firmware.
  • Verify that Auto Reboot and F.Reset Time are checked or enabled and other options are left at their default values.
  • Note: Do not load the PIT file found inside the firmware zip file as it will re-partition the device unnecessarily.
  • Now boot the device into Download mode as follows:
  • Turn off the phone and boot it into Download mode by pressing and holding Volume Down, Home and Power buttons together until the warning screen appears. Then hit Power button to confirm entry into Download mode.
  • Connect the device to computer via an USB cable.
  • After connecting the device, the Odin window will show the appropriate ID: COM port on the top-left along with the message saying "Added!!" on the display.
  • Click on Start and the firmware installation process will begin.
  • It may take just a few minutes to complete and then a "PASS" message will be displayed on screen.
  • Your Galaxy Note 3 will now reboot automatically to complete the installation process.
  • The first boot will take 5-10 minutes or sometimes may be even more. So do not panic.
How to flash







Review of the firmware by me


DOWNLOAD LINK (MEGA): http://goo.gl/mGM3RV

ODIN V3.09: http://goo.gl/Y83069

--------------------------------------------------------------------------------------------------------------------------

Samsung GALAXY Note 3 LTE SM-N9005


Official leaked lollipop firmware:

Procedure to install:

Step-1: Extract the downloaded firmware zip using any extracting tool to get a .tar.md5 file with few other files, which are optional
Step-2: Extract the Odin zip to get Odin3 v.3.09.exe with few other files
Step-3: Switch off the Galaxy Note 3
Step-4: Place the phone into Download Mode by pressing and holding HomePower and Volume Down button together
Note: Ensure that you have installed USB Drivers installed on the computer.
Step-5: Run Odin as Administrator  on the computer. To do so, right click on the application and select Odin as Administrator  from the drop down menu
Step-6: Connect the Galaxy Note 3 to computer using USB cable while it is in Download mode. Wait for some time until Odin detects the device. When the phone is connected successfully, the ID: COM box in Odin will turn light blue with COM port number. This step might take some time
Step-7: In Odin, click AP button and select the firmware file with .tar.md5 extension
Step-8: For 32GB Note 3, click Auto RebootRe-Partition and F.Reset Time checkboxes in Odin
For 16GB Note 3 models, ensure that only Auto-Reboot and F.Reset Time options are checked. Do not click the Re-partition option
Step-9: Verify everything and click the Start button in Odin. The installation process should begin now and take a few minutes to complete
Step-10: When the installation process is completed, the phone will restart automatically. Keep in mind that the first boot will take a little longer than usual, about 10 minutes. Do not press any button on the device during the process. After some time you should get the Android 5.0 screen
Navigate to Settings>> About phone to verify the new Android software version of your Note 3.
How to flash


Credits: Kawaljeet Singh
DOWNLOAD LINK (MEGA): http://goo.gl/58Qtc4
ODIN V3.09: http://goo.gl/cUcbEQ